🚀 go-pugleaf

	Inexpensive Intelligent Dedicated Controllers

I have several of BCC52 computer/controllers I would like to sell.
The BCC52 is a single-board mircocomputer that needs only a dumb terminal
and a power supply to become a complete system.  The board uses the Intel 
80C52 microprocessor which can be programmed with a ROM resident 8K byte
floating point BASIC, or 8031 assembly language. 
 
The board contains all of the following..

- sockets for up to 48k of RAM or EPROM (2764 or 27128)
- EPROM programming capability (requires additional power supply)
- 3 bidirectional parallel ports (8255 PPI chip)
- RS232 port with auto-baud rate selection
- RS232 printer port (output only)
- 256 bytes of RAM
- 3, 16 bit counter/timers

This controller board is from Micromint (800-635-3355).  They have a
full line of products that compliment the BCC52, including
digital and analog I/O, memory expansion, relay output, LCD display,
power supplies, BASIC utilities, real time clocks, etc.

I have used these boards as part of an X10 home control system,
but would like to get a bi-directional X10 controller.  The list price
is $189, but will sell for $75 each.

Please Contact:
Bob Steinbeiser
rgs@bbt.uucp
BroadBand Technologies
Research Triangle Park, NC
(919) 544-6850 x255