🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #4477

Re: Hissing from tape recorders ?

#4477
From: John Berryhill
Date: Fri, 06 Apr 1990 04:26
25 lines
1523 bytes
In article <3190@moondance.cs.uq.oz.au> anthony@batserver.cs.uq.oz.au writes:

>Just want to ask a simple question.  I notice that my tape recorder when
>played without a tape hisses.  I just want to know why and how I can
>get rid of the hiss.

Put in a tape.

> Is this because the head have been magnetised one
>way and need demagnetising ?
>SNAIL: Dept Comp. Science, University of Qld, St Lucia, Qld 4072, Australia

It is obvious from your signature that you probably have heads that
are polarized for the northern hemisphere instead of the southern
hemisphere where magnetic fields point the other way.  Short of going
to the electronics store to get what are usually callled "aussie heads,"
you might try operating your tape deck upside down.  You may also need
to adjust the tape speed to compensate for the coriolis effect which
is probably making your tapes run slightly faster than normal since
motors calibrated for the northern hemisphere have to turn the other
way.

--
							      John Berryhill
					   143 King William, Newark DE 19711
Technical Details
Message-ID: <16020@nigel.udel.EDU>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!udel!berryh
References: <3190@moondance.cs.uq.oz.au>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!udel!berryh
From: berryh@udel.edu (John Berryhill)
Newsgroups: sci.electronics
Subject: Re: Hissing from tape recorders ?
Message-ID: <16020@nigel.udel.EDU>
Date: 6 Apr 90 04:26:36 GMT
References: <3190@moondance.cs.uq.oz.au>
Sender: usenet@udel.EDU
Reply-To: berryh@udel.edu (John Berryhill)
Distribution: sci
Organization: University of Delaware
Lines: 25