Article View: sci.electronics
Article #4598Re: Novice question about CD headphone wire
From: Phil Arellano
Date: Wed, 11 Apr 1990 20:45
Date: Wed, 11 Apr 1990 20:45
17 lines
1026 bytes
1026 bytes
In article <17660060@hpfcdj.HP.COM> myers@hpfcdj.HP.COM (Bob Myers) writes:
>
>The wires ARE insulated - they very likely have a thin plastic or enamel
>coating (which is responsible for the color) and you have to scrape through
>that before they can be soldered.
Also, the copper colored wire may have a *clear* insulation coating. This
coating must be scraped off as well!
phil
--
UUCP: {ames,decwrl}!mips!phil -OR- phil@mips.com
USPS: MIPS Computer Systems, 930 Arques, Sunnyvale, CA 94086, (408) 991-0358
Technical Details
Message-ID:
<37849@mips.mips.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!mips!tau!philReferences:
<7601@goofy.Apple.COM> <17660060@hpfcdj.HP.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!mips!tau!phil From: phil@mips.COM (Phil Arellano) Newsgroups: sci.electronics Subject: Re: Novice question about CD headphone wire Message-ID: <37849@mips.mips.COM> Date: 11 Apr 90 20:45:44 GMT References: <7601@goofy.Apple.COM> <17660060@hpfcdj.HP.COM> Sender: news@mips.COM Reply-To: phil@mips.COM (Phil Arellano) Organization: MIPS Computer Systems, Sunnyvale, CA Lines: 17