Re: IR remote controls

Article View: sci.electronics

Article #4602

#4602

From: Doug Claar
Date: Wed, 11 Apr 1990 18:24

28 lines
1305 bytes

>             diode   resistor    ground
>+----+        
>|    |        | /|
>|'640|o-------|< |---/\/\/\/\/\---+
>|    |        | \|                |  
>+----+                          -----       
>                                 ---        
>                                  -         
>Of course, this is really gross...
>
=======================================

Yeah, EXTREMELY GROSS, since it is wrong. (Thanks Neal, for pointing 
this out--and without flaming, too!). Let's try:


             diode   resistor    VCC (+5v)
+----+                            o 
|    |        | /|                |
|'640|o-------|< |---/\/\/\/\/\---+
|    |        | \|                  
+----+                         
                              
This is STILL really gross, but it should at least work...

BLUSH!

--Doug "Free advice is worth every penny you pay" Claar

Technical Details

Message-ID: <6220019@hpcupt1.HP.COM>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!ucsd!ucbvax!hplabs!hpda!hpcupt1!dclaar

References: <4241@mit-caf.MIT.EDU>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!ucsd!ucbvax!hplabs!hpda!hpcupt1!dclaar
From: dclaar@hpcupt1.HP.COM (Doug Claar)
Newsgroups: sci.electronics
Subject: Re: IR remote controls
Message-ID: <6220019@hpcupt1.HP.COM>
Date: 11 Apr 90 18:24:10 GMT
References: <4241@mit-caf.MIT.EDU>
Organization: Hewlett Packard, Cupertino
Lines: 28

Reply to Parent Message