Re: Interfacing help needed: MC68230 <-> IBM PC bus

Article View: sci.electronics

Article #4822

#4822

From: Doug Claar
Date: Mon, 25 Jun 1990 17:42

11 lines
894 bytes

Is there a particular reason that you are using a Motorola part
in an Intel PC? It seems to me that you would save yourself lots
of grief by going Intel. I'm not familiar with the 68230, so 
you probably have good reasons...but I just thought I would ask.
Intel has some 8 bit counter/timers--don't know if they have 16 bit
critters. You might check around.

Doug Claar
Not speaking for: HP Computer Systems Division
UUCP: mcvax!decvax!hplabs!hpda!dclaar -or- ucbvax!hpda!dclaar
ARPA: dclaar%hpda@hplabs.HP.COM

Technical Details

Message-ID: <6220021@hpcupt1.HP.COM>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!tut.cis.ohio-state.edu!ucbvax!hplabs!hpda!hpcupt1!dclaar

References: <3350@sactoh0.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!tut.cis.ohio-state.edu!ucbvax!hplabs!hpda!hpcupt1!dclaar
From: dclaar@hpcupt1.HP.COM (Doug Claar)
Newsgroups: sci.electronics
Subject: Re: Interfacing help needed: MC68230 <-> IBM PC bus
Message-ID: <6220021@hpcupt1.HP.COM>
Date: 25 Jun 90 17:42:18 GMT
References: <3350@sactoh0.UUCP>
Organization: Hewlett Packard, Cupertino
Lines: 11

Reply to Parent Message