Article View: sci.electronics
Article #4920Re: RGB monitor stuff
From: Jim Cathey
Date: Mon, 02 Jul 1990 20:26
Date: Mon, 02 Jul 1990 20:26
8 lines
846 bytes
846 bytes
In article <17660080@hpfcdj.HP.COM> myers@hpfcdj.HP.COM (Bob Myers) writes: >...the video, as most commercially-available monitors expect RS-343 levels - >which give 1V p-p on green and about 0.7V p-p on red and blue. To clarify, the 1V on green is because RS-343 specifies sync on green. The green _video_ signal is (more or less) the same amplitude as red or blue, namely 0.7V p-p, the sync level is about 0.3V negative w.r.t. black. If the monitor has separate sync, then green should only need 0.7V p-p.
Technical Details
Message-ID:
<2880@isc-br.ISC-BR.COM>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!isc-br!jimcReferences:
<2686d1ca@nw.com> <17660080@hpfcdj.HP.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!isc-br!jimc From: jimc@isc-br.ISC-BR.COM (Jim Cathey) Newsgroups: sci.electronics Subject: Re: RGB monitor stuff Message-ID: <2880@isc-br.ISC-BR.COM> Date: 2 Jul 90 20:26:27 GMT References: <2686d1ca@nw.com> <17660080@hpfcdj.HP.COM> Organization: ISC-Bunker Ramo, An Olivetti Company Lines: 8