🚀 go-pugleaf

I am hoping some kind and knowledgeable person out there in net.land
can help me out (I am slightly desperate, and becoming increasingly so): 

I would like to be able to us a PC to detect and and store some sensor
data for further analysis.  Actually  what I currently want to do is to
be able to detect and distinguish between the opening and closing of 
several magnetically activated reed switches so that I can measure and
store elapsed time between switch activation to somewhere between .001
and .01 second accuracy.  While I have a vague idea of what I would like
to do (get switch opening/closing info into the PC -- probably via the
parallel port --  and use software to determine which switch has been 
activated and some built in timer function to  determine elasped time),
I am rather clueless as to the actual implementation.

How does one go about getting such information such as a switch's activation
onto the parallel port?  What sort of harware/interface is required?  Once
on the parallel port, how do I get this data into my program?  Any hardware/
software advice or examples would be tremendously helpful and appreciated!

E-mail would be the preferred method of response since I have difficulty
keeping current with newsgroups, but I promise to summarize responses if
people are interested.


--
INTERNET:	baron@uhunix.uhcc.hawaii.edu   -
BITNET:		baron@uhccux.bitnet            -    "Make beans into peas!"
ICBM:		21 19 N     157 52 W           -