Re: HIGH VOLTAGE STUN GUNS'S

Article View: sci.electronics

Article #525

#525

From: John Logajan
Date: Tue, 13 Jun 1989 18:07

21 lines
1510 bytes

In article <570@brambo.UUCP>, wwg@brambo.UUCP (Warren W. Gay) writes:
> >battery.  Consider that 75,000 volts applied to 220,000 ohms will cause
> >330 milliamps -- thus 25,000 watts.
> 
> You have not taken the internal source resistance into account. When you do, 
> you might find that the *current* is considerably lower.
> 
> What is the internal resistance of a typical high voltage capacitor that
> would be used in a "stun gun"?

Well, unless they aren't making conductors like they used to, I'd say the
worst case internal resistance of a hi-V capacitor is on the order of
1/10's of an ohm -- insignificant when compared to the 220,000 ohms of
the "target".

Do not confuse the dielectric resistance (which is hopefully very high) with
the plate/conductor resistance, which can be arbitrarily low.

-- 
- John M. Logajan @ Network Systems; 7600 Boone Ave; Brooklyn Park, MN 55428  -
- logajan@ns.network.com / ...rutgers!umn-cs!ns!logajan / john@logajan.mn.org -

Technical Details

Message-ID: <1448@ns.network.com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!csd4.milw.wisc.edu!srcsip!nic.MR.NET!ns!logajan

References: <426@aucis.UUCP> <19134@cos.com> <1434@ns.network.com> <570@brambo.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!csd4.milw.wisc.edu!srcsip!nic.MR.NET!ns!logajan
From: logajan@ns.network.com (John Logajan)
Newsgroups: sci.electronics
Subject: Re: HIGH VOLTAGE STUN GUNS'S
Keywords: HIGH VOLTAGE, STUN GUNS
Message-ID: <1448@ns.network.com>
Date: 13 Jun 89 18:07:09 GMT
References: <426@aucis.UUCP> <19134@cos.com> <1434@ns.network.com> <570@brambo.UUCP>
Sender: logajan@ns.network.com (John Logajan)
Organization: Network Systems Corp. Mpls MN
Lines: 21

Reply to Parent Message