Re: Has anyone made any homemade valves (tubes), semiconductors ...

Article View: sci.electronics

Article #5284

#5284

From: Donald P Perley
Date: Thu, 26 Jul 1990 17:04

17 lines
1221 bytes

In article <37291@shemp.CS.UCLA.EDU>, cccph@eel (Charles Hobbs) writes:
>In article <872@massey.ac.nz> GMoretti@massey.ac.nz (Giovanni Moretti) writes:

>You could do this successfully if you had some way of getting a  
>good vacuum. (Commercial valves have chemical compounds known as
>"getters" which aid in removing oxygen from the valve)

One thing that would help is to light up the tube for a bit with the
vacuum pump still running so any initial outgassing can get sucked 
out.

I'm not sure what is in the getters.. maybe those could be homebrewed
as well?

-don perley
perley@trub.crd.ge.com

Technical Details

Message-ID: <10368@crdgw1.crd.ge.com>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!rpi!crdgw1!galaxy

References: <872@massey.ac.nz> <37291@shemp.CS.UCLA.EDU>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!rpi!crdgw1!galaxy
From: perley@galaxy (Donald P Perley)
Newsgroups: sci.electronics,rec.ham-radio
Subject: Re: Has anyone made any homemade valves (tubes), semiconductors ...
Message-ID: <10368@crdgw1.crd.ge.com>
Date: 26 Jul 90 17:04:20 GMT
References: <872@massey.ac.nz> <37291@shemp.CS.UCLA.EDU>
Sender: news@crdgw1.crd.ge.com
Reply-To: perley@galaxy (Donald P Perley)
Followup-To: sci.electronics
Organization: GE Corp. R & D, Schenectady, NY 12345
Lines: 17
In-reply-to: cccph@eel.cs.ucla.edu (Charles Hobbs)

Reply to Parent Message