Article View: sci.electronics
Article #5351Termination of TTL <-> TTL cable
From: Jerry Burch
Date: Mon, 30 Jul 1990 18:45
Date: Mon, 30 Jul 1990 18:45
21 lines
1194 bytes
1194 bytes
I am working on a project which needs to communicate over a ten foot cable with TTL gates on either end. Simply connecting the outputs on one end to the inputs on the other end has resulted in glitches on some signal lines when others switch. Is there a proper method to terminate such a cable? Preferably this would only involve one end of the cable as the other is off of a port on a micro which uses a pair of LSTTL gates as buffers. Any suggestions would be appreciated. Jerry Burch jburch@polyslo.calpoly.edu -- +----------------------+------------------------------------+ | Jerry Burch | jburch@polyslo.CalPoly.EDU | +----------------------+------------------------------------+
Technical Details
Message-ID:
<26b48046.147d@petunia.CalPoly.EDU>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!uwm.edu!bionet!ucselx!petunia!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!uwm.edu!bionet!ucselx!petunia!news From: jburch@polyslo.CalPoly.EDU (Jerry Burch) Newsgroups: sci.electronics Subject: Termination of TTL <-> TTL cable Message-ID: <26b48046.147d@petunia.CalPoly.EDU> Date: 30 Jul 90 18:45:26 GMT Reply-To: jburch@polyslo.CalPoly.EDU (Jerry Burch) Distribution: na Organization: Cal Poly State Univ,CSC Dept,San Luis Obispo,CA 93407 Lines: 21