🚀 go-pugleaf

From article <1496@cs-spool.calgary.UUCP>, by hermann@cpsc.ucalgary.ca (Michael Hermann):
> In article <89Jun8.160452edt.10877@ephemeral.ai.toronto.edu> dudek@ai.toronto.edu (Gregory Dudek) writes:
>>
>> (the feeling is kind
>>of line a high-freq. vibration -- 60Hz?).

I have noticed this phenomenon for years, not just with conductors but with
a lot of commercially available equipment.  The sensation is as if the
surface of the item in question is "sticky-buzzy"(tm) and a finger moved
over the surface of such an item seems to vibrate at the 60 hz (In North
America) line frequeny.

One such device is the SONY ICF-2010 shortwave radio, when operated with
the 4.5v AC Supply, when touching some of the metal parts on the radio
during AC operation.  It is not just a defective set, as I have owned THREE
of them, and each had this phenomena.  

For the record, I am one of those persons who perspire a conductive
material (oil based) from the fingers.. i.e. I leave good fingerprints.

Other equipment I have owned also produces the effect.

-- 
| Gary Bourgois  flash@lopez.UUCP  ..rutgers!mailrus!sharkey!lopez!flash |
|              Great White North UPLink, Marquette Michigan              |
|  NATIONWIDE AMATEUR RADIO (1500 watts on 3950) --- nightly after 0200z |
|___________________WB8EOH - The Eccentric Old Hippie____________________|