🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #5589

Re: Zenith EZ-1 Hard Disk Expansion

#5589
From: Barry Pederson
Date: Wed, 15 Aug 1990 19:17
24 lines
1627 bytes

We're kind of in the same fix, we have 4 EZ-PC's (I think we're talking
about the same machine) with hard disks and one without.  We've been calling
around, and have heard two stories:

    1) You need a special drive that has the controller built in
       (I think they were talking about IDE drives)

    2) The motherboard of a dual-floppy machine is different from the
       one on a hard-drive machine.

Story #1 makes sense, and you can buy these drives for about $300.  I'm not
sure about story #2, but the guys who said this said you could have your
motherboard replaced and a hard disk installed for around $700.  We passed on
that deal since you could get a new machine for that much.

You can also get an expansion chassis called the WonUnder, that will let you
plug in some XT type cards, but the chassis is around $300 I think, and seemed
kind of kludgy.

Barry Pederson         InterNet: ud092096@vm1.nodak.edu (preferred)
                         BitNet: ud092096@ndsuvm1
                            BIX: barryp
Technical Details
Message-ID: <4492UD092096@NDSUVM1>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!ucsd!swrinde!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!psuvm!cunyvm!ndsuvm1.bitnet!ud092096
References: <4100@elgendy>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!ucsd!swrinde!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!psuvm!cunyvm!ndsuvm1.bitnet!ud092096
From: UD092096@NDSUVM1.BITNET (Barry Pederson)
Newsgroups: sci.electronics,comp.os.msdos.programmer
Subject: Re: Zenith EZ-1 Hard Disk Expansion
Message-ID: <4492UD092096@NDSUVM1>
Date: 15 Aug 90 19:17:47 GMT
References: <4100@elgendy>
Distribution: na
Organization: North Dakota Higher Education Computer Network, Fargo, ND
Lines: 24
DISCLAIMER: Author bears full responsibility for contents of this article.