🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #5637

Fooling Radar Detectors

#5637
From: Mark Fisher
Date: Tue, 14 Aug 1990 23:31
25 lines
1536 bytes
What do you guys and gals think of this idea?

Mount 4 or so corner reflectors on a rotating frame such as
a plastic bicycle tire.  Coat the back of the reflector with resistive
foam to dissipate the radar energy.  Make the corner reflector large
enough RCS (Radar Cross Section) wise to be much brighter than your
car.  Turn the reflectors at a constant rate of something like 120
RPM.  And wa-la your car's dominate doppler shift will be  ~ 10 mph
less than you are actually going.  That is assumming you can figure
out which way to turn the reflectors ;)

The apparent speed of the reflectors will have a sinusoidal modulation
to it from going around in circles.  This may prevent the radar from
getting a good lock on the doppler shift and lock in on the steady
doppler shift from the car even though it is dimmer RCS wise.  If this
is so then you put your corner reflectors on a flat belt and rotate
them like a belt sander.

I would hate to get caught with something like this on the top of my
car. :^)
--
// Mark M. Fisher 
// fish@gemed.ge.com
// uunet!crdgw1!gemed!fish
// sun!sunbrew!gemed!fish
Technical Details
Message-ID: <FISH.90Aug14183156@his.gemed.com>
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!uwm.edu!mrsvr.UUCP!fish

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!uwm.edu!mrsvr.UUCP!fish
From: fish@gemed.com (Mark Fisher)
Newsgroups: sci.electronics
Subject: Fooling Radar Detectors
Message-ID: <FISH.90Aug14183156@his.gemed.com>
Date: 14 Aug 90 23:31:56 GMT
Sender: news@mrsvr.UUCP
Reply-To: fish@gemed.ge.com (Mark Fisher, GE Medical, Milwaukee WI, x4-6553)
Organization: GE Medical Systems, Milwaukee, WI
Lines: 25