SRM-drive simulation with SPICE

Article View: sci.electronics

Article #6044

#6044

From: Frank Kirchhoff
Date: Mon, 07 Sep 1992 09:06

22 lines
1103 bytes

 I am designing a drive for Switched Reluctance Motor (SRM). To do
this, I need a simulator. A possible solution is, to implement the drive (motor,
power electronic and controller) in SPICE. Exist any implementation? Is someone
doing the same? Any idea is welcome.

Thanks in advance
                                Frank

-------------------------------------------------------------------------------

Berlin University of Technology
Sekr. FR3-9

Frank Kirchhoff

Franklinstrasse 28/29
1000 Berlin 10
Email:kirchoff@cs.tu-berlin.de
Phone:(Germany)030/31425689
Fax:(Germany)030-31421103

-------------------------------------------------------------------------------

Technical Details

Message-ID: <1992Sep7.090646.12021@cs.tu-berlin.de>

Path: arc1-ca.pugleaf.net!sparky!uunet!math.fu-berlin.de!zrz.tu-berlin.de!cs.tu-berlin.de!kirchoff

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!math.fu-berlin.de!zrz.tu-berlin.de!cs.tu-berlin.de!kirchoff
From: kirchoff@opal.cs.tu-berlin.de (Frank Kirchhoff)
Subject: SRM-drive simulation with SPICE
Message-ID: <1992Sep7.090646.12021@cs.tu-berlin.de>
Keywords: SPICE, SRM
Sender: news@cs.tu-berlin.de
Organization: Techn. University of Berlin, Germany
Date: Mon, 7 Sep 1992 09:06:46 GMT
Lines: 24