Re: Canned Oscillator Pinout

Article View: sci.electronics

Article #6207

#6207

From: Barry Drodge
Date: Thu, 13 Aug 1992 01:32

30 lines
1491 bytes

In article <1992Aug10.045201.1@fnalc.fnal.gov>, ifversen@fnalc.fnal.gov (King Under the Mountain) writes:
> In article <df2mh2n.nagle@netcom.com> (John Nagle) writes:
> >Keywords: oscillator crystal
> 
> >     Easy question.  What's the pinout for standard 4-pin oscillators that
> >come in a DIP-like package?  I know they take +5 on two pins and put
> >out the indicated frequency on the other two, but which pins?
> 
> Pin "1" (marked pin) -- no connection.
> Pin "7" -- GND.
> Pin "8" -- Output.
> Pin "14" -- +VCC.
> 


Actually, Pin 1 is either No Connection or Output Enable, depending on the
manufacturer and the model number of the part.

Canned oscillators are usually available with either CMOS or TTL output levels
capable of driving around a 4 mA load.



Regards,

--
Barry.R.Drodge@Waterloo.NCR.COM
Imaging Systems Division, NCR Canada LTD. 580 Weber ST. N, Waterloo, Ontario
Canada N2J 4G5                         Voice: 519-884-1710 FAX:519-884-0610
"My job is so top secret that it keeps me from knowing what I am doing!"

Technical Details

Message-ID: <9800@ncrwat.Waterloo.NCR.COM>

Path: arc1-ca.pugleaf.net!sparky!uunet!psinntp!ncrlnk!ncrwat!images1!brd

References: <1992Aug10.045201.1@fnalc.fnal.gov>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!psinntp!ncrlnk!ncrwat!images1!brd
From: brd@images1.Waterloo.NCR.COM (Barry Drodge)
Newsgroups: sci.electronics
Subject: Re: Canned Oscillator Pinout
Message-ID: <9800@ncrwat.Waterloo.NCR.COM>
Date: 13 Aug 92 01:32:11 GMT
References: <1992Aug10.045201.1@fnalc.fnal.gov>
Sender: news@ncrwat.Waterloo.NCR.COM
Organization: Imaging Systems Division, NCR Corp, Waterloo, Ont., CANADA
Lines: 30

Reply to Parent Message