Info wanted on Adac 5532DMA or 5532TTL Boards

Article View: sci.electronics

Article #6212

#6212

From: Ben K Gibson
Date: Wed, 09 Sep 1992 14:51

15 lines
1117 bytes

I am looking for information on the Adac 5532DMA or 5532TTL boards.
I am having a problem getting the board to transfer data after an
interrupt is generated. If you have had any success integrating one of
these boards, please e-mail me your phone number. I would like to talk
with you. BTW I get the same symptoms with the ADLIB software as I get
with my own polling software. Adac insists it has to be the SW.

Thanks in Advance,


-- 
KKK  KKK  Ben K. Gibson                           E-mail: bkg@ssd.kodak.com
KK Kodak  Eastman Kodak Company                   Phone:  (716)588-4313
KKK  KKK  Rochester, NY 
----------------- Opinions Expressed are my own, Not EK Co. -----------------

Technical Details

Message-ID: <1992Sep9.145102.19537@pixel.kodak.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!zaphod.mps.ohio-state.edu!rpi!newsserver.pixel.kodak.com!bkg

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!zaphod.mps.ohio-state.edu!rpi!newsserver.pixel.kodak.com!bkg
From: bkg@ssd.kodak.com (Ben K Gibson)
Subject: Info wanted on Adac 5532DMA or 5532TTL Boards
Message-ID: <1992Sep9.145102.19537@pixel.kodak.com>
Originator: bkg@earth
Sender: news@pixel.kodak.com
Organization: Eastman Kodak
Distribution: usa
Date: Wed, 9 Sep 92 14:51:02 GMT
Lines: 15