Article View: sci.electronics
Article #6358Impedance match 50 to 75 ohms
From: Brian R. OHern BROHERN
Date: Thu, 10 Sep 1992 17:58
Date: Thu, 10 Sep 1992 17:58
13 lines
1104 bytes
1104 bytes
Short of buying a pad, does anyone know a good (cheap) way of matching a
cable tv coax (75ohms) to the input of a HP spectrum analyzer (50 ohms)?
I'm interested in the 500MHz to 1GHz range.
Thanks
BRO'HERN (Electronics Engineer)
____________________________________________________________________________
STD DISCLAIM APPLIES ('disClaim dat I make is no lie...)
Unless otherwise noted, I say what I say about what I think or thought with
total disregard for what the U. S. Air Force says or thinks and vice versa.
____________________________________________________________________________
Technical Details
Message-ID:
<1992Sep10.175850.24383@lonex.rl.af.mil>Path:
arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!udecc.engr.udayton.edu!blackbird.afit.af.mil!lonex.rl.af.mil!usenetShow Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!udecc.engr.udayton.edu!blackbird.afit.af.mil!lonex.rl.af.mil!usenet From: Brian R. O'Hern (BRO'HERN) Subject: Impedance match 50 to 75 ohms Message-ID: <1992Sep10.175850.24383@lonex.rl.af.mil> Followup-To: same Sender: brohern.rl.af.mil Nntp-Posting-Host: brohern.rl.af.mil Reply-To: ohernb@lonexb.rl.af.mil Organization: USAF Rome Laboratory Distribution: na Date: Thu, 10 Sep 92 17:58:50 GMT Lines: 13