SER 486 motherboard info needed

Article View: sci.electronics

Article #6470

#6470

From: Robert Ankeney
Date: Thu, 27 Aug 1992 23:02

16 lines
1160 bytes

     I recently got a 486 motherboard at an auction, sans documentation.
It has an attached memory board, with bank 0 on the left side and banks
1 and 2 on the right, with a 5-position DIP switch to configure it.
The mother board has a 486 with a Chips & Technology chipset in the middle
of the board.  Screened near the CPU is a note regarding CPU selection
(JP2 CPU SELECT).  The board has a 4-chip AMI bios.  Other than that,
there is no manufacturer's name other than the box it came in labelled
"SER" on the top..  Also the motherboard has a part number 702440B and
35-2495-01 on it.
     Does anyone have any info regarding this set?  Jumper info would
be especially nice.  Schematic even nicer!  Or a number for someone who
handles SER parts even?!

     Thanks for the info,
     Robert

Technical Details

Message-ID: <1992Aug27.230235.1170@reed.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!cs.utexas.edu!uwm.edu!ogicse!reed!bob

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!cs.utexas.edu!uwm.edu!ogicse!reed!bob
From: bob@reed.edu (Robert Ankeney)
Newsgroups: sci.electronics
Subject: SER 486 motherboard info needed
Message-ID: <1992Aug27.230235.1170@reed.edu>
Date: 27 Aug 92 23:02:35 GMT
Article-I.D.: reed.1992Aug27.230235.1170
Organization: Reed College, Portland, OR
Lines: 16