Re: Success! Resist Pen Works in HP Plotter!

Article View: sci.electronics

Article #6560

#6560

From: Mika Iisakkila
Date: Sat, 12 Sep 1992 13:42

11 lines
1047 bytes

agodwin@acorn.co.uk (Adrian Godwin) writes:

>How about using the standard pen to draw on a photosensitive resist, which is
>then developed and etched in the usual way ?

Or replacing the pen with a light source, like a high-intensity led
at the end of an optic fibre and using the pen down -signal to light
it? There are commercial equipment like this (I'm not talking of the
Gerber type photoplotters with aperture wheels).
--
Segmented Memory Helps Structure Software

Technical Details

Message-ID: <IISAKKIL.92Sep12134204@vipunen.hut.fi>

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!news.funet.fi!ajk.tele.fi!funic!nntp.hut.fi!nntp!iisakkil

References: <78655@ut-emx.uucp> <18219@acorn.co.uk>

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!news.funet.fi!ajk.tele.fi!funic!nntp.hut.fi!nntp!iisakkil
From: iisakkil@vipunen.hut.fi (Mika Iisakkila)
Subject: Re: Success! Resist Pen Works in HP Plotter!
In-Reply-To: agodwin@acorn.co.uk's message of 1 Sep 92 13:27:43 GMT
Message-ID: <IISAKKIL.92Sep12134204@vipunen.hut.fi>
Sender: usenet@nntp.hut.fi (Usenet pseudouser id)
Nntp-Posting-Host: vipunen.hut.fi
Organization: Helsinki University of Technology
References: <78655@ut-emx.uucp> <18219@acorn.co.uk>
Date: 12 Sep 92 13:42:04
Lines: 11

Reply to Parent Message