🚀 go-pugleaf

In article <1990Sep12.162833.15567@wrl.dec.com> reid@wrl.dec.com (Brian Reid) writes:
>
>I want to buy a "strip chart recorder". I thougrht this was a very well-known
>device, but I just got back from my local electronics store (Fry's) and the
> .........
>Brian Reid
>reid@decwrl.dec.com

Good luck! I had looked for quite some time for a strip recorder before I
gave up and built one. A home brew recorder is fairly straight forward (unless
you need to record thermocouples). Use calculator tape, and old clock motor,
and build a little DC servo driver for the pen. A few years ago I started
using a PC for data collection and gave up on recorders all together.

John

PS. the servo would be a lot simpler these days with the single chip
    servo systems I've seen around.
.....................................................................
reply to 'from' address; hbg6@citek.mcdphx.mot.com
NOT the 'sender' line address!
Someday my sysadm will decide this is a 'real' problem. :-)
.....................................................................
All opinions expressed are mine and not Motorolas, their loss.
.....................................................................