Article View: sci.electronics
Article #7302Re: CLOCK NEED TO BE SET ON BOOT UP
From: Peter Lim
Date: Wed, 12 Sep 1990 20:55
Date: Wed, 12 Sep 1990 20:55
28 lines
1797 bytes
1797 bytes
Any version of DOS since version 2.x (I've never have the fortune to
use DOS 1.x :-)), will not ask you the two time/date questions if
you have an AUTOEXEC.BAT file on your boot disk.
If you don't already have one, boot your PC, type "COPY CON AUTOEXEC.BAT",
then hit a return, a control-Z, and another return. Now, it is there.
This will prevent the asking of the questions, but it does not actually
set the PC clock.
Now if you have a PC (8088) instead of an AT (286) type of machine, then
you'll need to run a program that loads the PC timer from the real time
clock which is probably sitting on an expansion card. This program is
different for different card, so .......
For an AT, it is automatically loaded when the machine fires up.
Hope that helps.
Regards, ## Life is fast enough as it is ........
Peter Lim. ## .... DON'T PUSH IT !! >>>-------,
########################################### :
E-mail: plim@hpsgwg.HP.COM Snail-mail: Hewlett Packard Singapore, :
Tel: (065)-279-2289 (ICDS, ICS) |
Telnet: 520-2289 1150 Depot Road, __\@/__
... also at: pnl@hpfipnl.HP.COM Singapore 0410. SPLAT !
#include <standard_disclaimer.hpp>
Technical Details
Message-ID:
<15880018@hpfinote.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!apple!usc!samsung!uakari.primate.wisc.edu!sdd.hp.com!hplabs!hpfcso!hpfinote!pnlReferences:
<35499@eerie.acsu.Buffalo.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!apple!usc!samsung!uakari.primate.wisc.edu!sdd.hp.com!hplabs!hpfcso!hpfinote!pnl From: pnl@hpfinote.HP.COM (Peter Lim) Newsgroups: sci.electronics Subject: Re: CLOCK NEED TO BE SET ON BOOT UP Message-ID: <15880018@hpfinote.HP.COM> Date: 12 Sep 90 20:55:44 GMT References: <35499@eerie.acsu.Buffalo.EDU> Organization: Hewlett Packard CICD Lines: 28