Crossovers

Article View: sci.electronics

Article #7444

#7444

From: Christopher Fleming Lane
Date: Thu, 13 Sep 1990 16:30

17 lines
1146 bytes

I need some advice.

A friend and I have built a subwoofer system and are having trouble
determining the best type of crossover to use.  It should definitely
have a crossover point below 150 Hz and preferably have at least a 12
dB/decade rolloff.  It should also have a power handling capability of
at least 200 Watts if it is a passive design.  We have looked for
articles and advice for a while and I have decided to give the resources
of this bboard a chance.

We would prefer an active crossover, but if we get a good passive
design, it is not out of the question.  If anyone has any schematics or
suggestions, please contact me.

Thanks
Chris Lane
cl2n@andrew.cmu.edu

Technical Details

Message-ID: <IavvEku00VpRFECkUj@andrew.cmu.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!mephisto!udel!rochester!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!cl2n+

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!mephisto!udel!rochester!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!cl2n+
From: cl2n+@andrew.cmu.edu (Christopher Fleming Lane)
Newsgroups: sci.electronics
Subject: Crossovers
Message-ID: <IavvEku00VpRFECkUj@andrew.cmu.edu>
Date: 13 Sep 90 16:30:40 GMT
Organization: Class of '92, Carnegie Mellon, Pittsburgh, PA
Lines: 17