Article View: sci.electronics
Article #7447Re: micro-controller
From: Steven Murray
Date: Tue, 25 Sep 1990 16:59
Date: Tue, 25 Sep 1990 16:59
16 lines
1240 bytes
1240 bytes
torgeirs@ulrik.uio.no (Torgeir Svolsbru) writes: >But how do you get the program into the EPROM of the 87C751 ? >Do they provide an adapter for the use of a standard EPROM-programmer Adaptors for standard eprom programmers are not practical for this device, due to the specialized timed-signature that has to be inserted down the RESET pin to get the device into program mode. However, a reasonably priced programmer is available from Philips in New Zealand, p.o. box 1041, Auckland, phone (649) 605-914, and Philips in Australia, 11 Waltham St, Artarmon 2064, Sydney, phone (612) 439-3322. I believe these programmers are being sold at not much more than cost price in order to encourage use of the microprocessors. The programmer does chips 87C751/752/87C552/87C451 which I use. Hope this helps - Steven Murray.
Technical Details
Message-ID:
<1990Sep25.165917.24637@specialix.co.uk>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!slxsys!stevemReferences:
<LLEE.90Sep17091114@dopey.uucp> <998@massey.ac.nz> <TORGEIRS.90Sep21142322@ulrik.uio.no>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!slxsys!stevem From: stevem@specialix.co.uk (Steven Murray) Newsgroups: sci.electronics Subject: Re: micro-controller Message-ID: <1990Sep25.165917.24637@specialix.co.uk> Date: 25 Sep 90 16:59:17 GMT References: <LLEE.90Sep17091114@dopey.uucp> <998@massey.ac.nz> <TORGEIRS.90Sep21142322@ulrik.uio.no> Organization: Specialix International, London Lines: 16