Re: Fabrication of cases

Article View: sci.electronics

Article #7460

#7460

From: Mark Robert Thorson
Date: Wed, 26 Sep 1990 05:38

8 lines
719 bytes

Sheet tin or copper is easy to shape, easy to cut (with tin snips),
cheap, and can be soldered.  I made some nice templates using sheet tin
cut from some galvanized serving trays which cost only $0.50 each.
In the old days, you could use a tin can, but that was a long
time ago.

A local dealer in scrap metals would be a better source if you need larger
quantity.

Technical Details

Message-ID: <34278@cup.portal.com>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!decwrl!fernwood!portal!cup.portal.com!mmm

References: <3015@anasaz.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!decwrl!fernwood!portal!cup.portal.com!mmm
From: mmm@cup.portal.com (Mark Robert Thorson)
Newsgroups: sci.electronics
Subject: Re: Fabrication of cases
Message-ID: <34278@cup.portal.com>
Date: 26 Sep 90 05:38:40 GMT
References: <3015@anasaz.UUCP>
Distribution: na
Organization: The Portal System (TM)
Lines: 8

Reply to Parent Message