Article View: sci.electronics
Article #7547Home Control (was Re: BSR Remotes and Touch Lamps)
From: Andrew Dyer x2446
Date: Tue, 02 Oct 1990 18:10
Date: Tue, 02 Oct 1990 18:10
20 lines
1381 bytes
1381 bytes
I believe that there are guidelines about what sorts of signals and
power levels one can couple onto electrical wires, right? So where do
I get my hands on them? Also I have heard of an emerging spec for
home/industrial control type applications, does anybody know anything
about this?
What I am looking for is a sort of 'dishwasher lan' where all devices
have a distinct address, and can respond to control signals with
information about current status. All this would go across the
internal house wiring or low-speed infra-red links. I could then
kludge interfaces onto all of my current stuff(hopefully) and hook it
all to a pc as a controller/gateway system.
--
--
{uunet, mips, decwrl}!wyse!milo!adyer or adyer@milo.wyse.com
Andrew Dyer, c/o Wyse Technology MS203-3
3471 N. First St., San Jose, CA 95134-1803
Technical Details
Message-ID:
<ADYER.90Oct2111046@milo.wyse.com>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!mips!wyse!adyerReferences:
<1486@vitec.UUCP> <26fe300c-435.1sci.electronics-1@vpnet.chi.il.us>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!mips!wyse!adyer From: adyer@milo.wyse.com (Andrew Dyer x2446) Newsgroups: sci.electronics Subject: Home Control (was Re: BSR Remotes and Touch Lamps) Message-ID: <ADYER.90Oct2111046@milo.wyse.com> Date: 2 Oct 90 18:10:46 GMT References: <1486@vitec.UUCP> <26fe300c-435.1sci.electronics-1@vpnet.chi.il.us> Sender: news@wyse.wyse.com Organization: Wyse Technology, Inc. Lines: 20 In-reply-to: cgordon@vpnet.chi.il.us's message of 24 Sep 90 17:55:05 GMT