🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #7785

Re:homemade welder

#7785
From: rcte2q
Date: Mon, 15 Oct 1990 22:04
10 lines
921 bytes
It's been a while since I read this aarticle, but in the late 80's, AUDIO
magazine reviewed a (then) new Mark Levinson monophonic power amp, model 31
or 16.    The review team waxed poetic about the near invulnerability of the
design.   As an extreme attempt to make the amp malfunction, they fed a 1 khz
test tone in, hooked welding rods to the speaker output, and cranked up the
volume.   They showed a picture of the rig as it cut metal.   As the cut was
being made, the test tone could be clearly heard emanating from the plasma.
Talk about esoteric....

--Jazz Ninja
Technical Details
Message-ID: <7203.2719ec15@jetson.uh.edu>
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!usc!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!lavaca.uh.edu!jetson.uh.edu!rcte2q

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!usc!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!lavaca.uh.edu!jetson.uh.edu!rcte2q
From: rcte2q@jetson.uh.edu
Newsgroups: sci.electronics
Subject: Re:homemade welder
Message-ID: <7203.2719ec15@jetson.uh.edu>
Date: 15 Oct 90 22:04:20 GMT
Organization: University of Houston
Lines: 10