Re: How to make 600VDC from 800VDC

Article View: sci.electronics

Article #7848

#7848

From: James W. Swonger
Date: Thu, 18 Oct 1990 13:42

26 lines
1468 bytes

      800V+ --------------|------|
                          |      |
                          >      |
   Limiting resistor ~   <       |
   10K ohms (20mA base    >      |
   drive, assume Hfe is   |    | /
   >= 10.                 |    |/     TV flyback (horizontal
                          +----|      output) 1500V BVceo  
                          |    |\     at least 50W. Better to
                         ---   | V    parallel a couple with 
                          ^      |    emitter ballast resistors.
                         /_\     |____________ 600V+
                          |
                          .
                          . Stack of diodes with
                          . breakdown ~ 600V
                          |
                         ---
                          ^
                         /_\
                          |
                        __|__
                        /////

Technical Details

Message-ID: <1990Oct18.134252.4635@mlb.semi.harris.com>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!wuarchive!uwm.edu!rutgers!soleil!mlb.semi.harris.com!thumper.mlb.semi.harris.com!jws

References: <92@decabo.enet.dec.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!wuarchive!uwm.edu!rutgers!soleil!mlb.semi.harris.com!thumper.mlb.semi.harris.com!jws
From: jws@thumper.mlb.semi.harris.com (James W. Swonger)
Newsgroups: sci.electronics
Subject: Re: How to make 600VDC from 800VDC
Message-ID: <1990Oct18.134252.4635@mlb.semi.harris.com>
Date: 18 Oct 90 13:42:52 GMT
References: <92@decabo.enet.dec.com>
Sender: news@mlb.semi.harris.com
Organization: Harris Semiconductor, Melbourne FL
Lines: 26
Nntp-Posting-Host: thumper.mlb.semi.harris.com

Reply to Parent Message