🚀 go-pugleaf

In article <10700@milton.u.washington.edu> whit@milton.u.washington.edu (John Whitmore) writes:
>	Now begins the fun.  Old disk drives (those 8" jobbies no one
>wants) used nice big stepper motors for the head positioning; 5 1/4"
>floppies might have used one for the spindle motor; lots of machines
>have a few steppers inside.  Go junkyard-prospecting!  Any stepper big
>enough will likely be usable (the things are hard to destroy).

A great source for stepper motors are old computer printers. The old QUME and
DIABLO daisywheel printers had excellent steppers in them. Some of the big
"line" printers used with minicomputers are a good source for LARGE steppers.

Also check old tape drives, card-readers/punches, etc.

Check out your local Computer Centre for any junked or unused printers! :-)

Steve

----_--_-_-_--_-__-_------_-__---_-___-_----_-____-_-_--__-_--_--___-_-_-_--__-_
Steve Balogh  VK3YMY                  | steve@monu6.cc.monash.edu.au
Monash University (Caulfield Campus)  |      37 52'38.8"S  145 02'42.0"E ...ICBM
PO Box 197, Caulfield East	      |      +61 3 573 2266 Voice (Office)
Melbourne, AUSTRALIA. 3145	      |      +61 3 571 3646 Fax