Re: Motorola 68HC11 EVB board

Article View: sci.electronics

Article #8376

#8376

From: David Newton
Date: Wed, 14 Nov 1990 05:19

11 lines
1163 bytes

>> What do you use as a power supply? (and how much did it cost?)
>I built my own from a junked piece of gear.  Any 5V supply will work, the
>board is self-regulated.  Use .1 uf decoupling caps on any external logic.

   That's strange, my board also required +/- 12V for the serial ports.

--
David L. Newton	    |  Work: (708) 491-4791  | VR is great!!  I died in one-
ILS, Room 327       |  Home: (708) 332-2321  | (with virtual  insurance,  of
1890 Maple St.      |------------------------| course) collected it,  and am
Evanston, IL  60201 | Gumby Cyberdeck Jockey | now virtually happy. I think.

Technical Details

Message-ID: <2551@anaxagoras.ils.nwu.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!rochester!uhura.cc.rochester.edu!ub!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!pacbell.com!att!linac!tellab5!nucsrl!accuvax.nwu.edu!anaxagoras!ils.nwu.edu!newton

References: <6690@uceng.UC.EDU> <4841@optilink.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!rochester!uhura.cc.rochester.edu!ub!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!pacbell.com!att!linac!tellab5!nucsrl!accuvax.nwu.edu!anaxagoras!ils.nwu.edu!newton
From: newton@ils.nwu.edu (David Newton)
Newsgroups: sci.electronics
Subject: Re: Motorola 68HC11 EVB  board
Message-ID: <2551@anaxagoras.ils.nwu.edu>
Date: 14 Nov 90 05:19:41 GMT
References: <6690@uceng.UC.EDU> <4841@optilink.UUCP>
Sender: news@anaxagoras.ils.nwu.edu
Reply-To: newton@ils.nwu.edu (David Newton)
Lines: 11

Reply to Parent Message