🚀 go-pugleaf

> There was a post to rec.music.makers a few weeks ago that
> didn't really get answered.  Does anyone have information
> on making a controller driven by MIDI information?  I am
> personally interested in controlling lights via my musical
> sequencing, but really anything electronic could be controlled.

I guess it's just another  microcontroller kind of project.  You
need a uP (nothing in MIDI can be done without one), a MIDI port
(that is opto-coupler,  and UART), some code, and I guess if you
want  to  control  lights  some  industrial  strength  digitally
controlled switching electronics.

My suggestion in the uP department is something  like a Motorola
6802  (built in serial  port that will run at MIDI  speed,  some
RAM, etc), or maybe even 68HC11 (lots of stuff, including an A/D
converter).  Read any  book on MIDI,  they'll  tell  you  need a
Sharp PC-900, or HP 138?  opto.

There  has been a few  articles  on uP based  MIDI  projects  in
Electronic  Musician  (recent),  Keyboard  (a Casio SK-1  mod'),
others back around 86/87 (when people still built home brew MIDI
interfaces  for their home PCs).  Also, get the  service  manual
for some MIDI box, that helps me - say any little Yamaha control
box.  I'm sure  there a million  things out there  that can tell
you about controlling lights.

Hope that helps some.

David Williams
___________________________________________________________________
Hewlett-Packard Scientific Instruments Division (SID) /\___________
1601 California Ave, Palo Alto, CA, USA. /\______________/\________
phone: 415 857 6100. FAX: 415 852 8011  //\\____________|__________
HP-UX Mail:  djw@hpldsla.hp.com         /  \____/\____/\___________
HPdesk:     (djw)hpldsla/HP1900/00     /\____________/  \__________