Decrambler in Radio Electronics

Article View: sci.electronics

Article #8833

#8833

From: Christopher Fleming Lane
Date: Wed, 05 Dec 1990 20:12

14 lines
1104 bytes

Me and a friend are thinking of building the universal descrambler in
the May 1990 issue of Radio Electronics.  We were wondering if anyone
out there had already built it and had any tips for us.

Things we were hoping to hear about are:
1. Performance - Does it work well, and how is the final picture quality?
2. Trickiness - Are some parts of the construction far from obvious that
                   may result in the toasting of the circuit if not done
                   properly?
3. Cost - how much did you pay for the entire project, including components
          board, enclosure, etc.
Thanks for you Help,
Chris Lane
cl2n@andrew.cmu.edu

Technical Details

Message-ID: <sbLJGFC00WB649dEto@andrew.cmu.edu>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!peregrine!elroy.jpl.nasa.gov!sdd.hp.com!zaphod.mps.ohio-state.edu!ub!rutgers!rochester!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!cl2n+

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!peregrine!elroy.jpl.nasa.gov!sdd.hp.com!zaphod.mps.ohio-state.edu!ub!rutgers!rochester!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!cl2n+
From: cl2n+@andrew.cmu.edu (Christopher Fleming Lane)
Newsgroups: sci.electronics
Subject: Decrambler in Radio Electronics
Message-ID: <sbLJGFC00WB649dEto@andrew.cmu.edu>
Date: 5 Dec 90 20:12:01 GMT
Organization: Class of '92, Carnegie Mellon, Pittsburgh, PA
Lines: 14