Article View: sci.electronics
Article #9045Re: Radio Electronics Descrambler
From: quodling
Date: Wed, 19 Dec 1990 16:22
Date: Wed, 19 Dec 1990 16:22
20 lines
1540 bytes
1540 bytes
In article <1990Dec18.224950.7142@usenet@scion.CS.ORST.EDU>, harrist@jacobs.CS.ORST.EDU (Tim Harris) writes: > In article <1990Dec17.184710.28481@csn.org> tomf@boulder.Colorado.EDU writes: >> >>Has anyone out there built the Signal Descrambler from May of 1990's >>Radio Electronics? If so how well did it work? This may have been > . > the one who really knows what he's doing). My brother poked > around the board with his finger and BAM, it locked up and was > working pretty good but unfortunately when you unplug it you have > to poke at it again to jump start it. At that point we took it I would say that either you have a bad solder joint and his poking nudged it enough to come good, or There is a poor ground somewhere, and his finger provided a better one... -- Peter Quodling Internet: quodling@blumon.enet.dec.com Digital Equipment Corporation UUCP: ...!decwrl!blumon.enet!quodling Nashua, NH. I disclaim everything!!!
Technical Details
Message-ID:
<1990Dec19.112229.1@bunyip.enet.dec.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!apple!agate!ucbvax!bloom-beacon!deccrl!news.crl.dec.com!shlump.nac.dec.com!bunyip.enet.dec.com!quodlingReferences:
<1990Dec17.184710.28481@csn.org> <1990Dec18.224950.7142@usenet@scion.CS.ORST.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!apple!agate!ucbvax!bloom-beacon!deccrl!news.crl.dec.com!shlump.nac.dec.com!bunyip.enet.dec.com!quodling From: quodling@bunyip.enet.dec.com Newsgroups: sci.electronics Subject: Re: Radio Electronics Descrambler Message-ID: <1990Dec19.112229.1@bunyip.enet.dec.com> Date: 19 Dec 90 16:22:29 GMT References: <1990Dec17.184710.28481@csn.org> <1990Dec18.224950.7142@usenet@scion.CS.ORST.EDU> Sender: newsdaemon@shlump.nac.dec.com Organization: The New Software Group Lines: 20