Article View: sci.electronics
Article #9192Re: Jacob's Ladder "single shot" circuit wanted. It _can_ be do
From: David J Bell
Date: Sun, 30 Dec 1990 08:43
Date: Sun, 30 Dec 1990 08:43
10 lines
962 bytes
962 bytes
Sounds like you're on the right track: When you push the button, it could dump a charge through a cap to the center electrode, which has a shorter gap to the return electrode. This would provide the initial burst of ionized air to allow the arc to continue. Once the arc "blew out" at the top, it couldn't restart by itself. If the switch in question transferred the charged capacitor to the initiator electrode, isolating it from the source, you would get the one-shot effect you describe... Dave dbell@cup.portal.com
Technical Details
Message-ID:
<37392@cup.portal.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!fernwood!portal!cup.portal.com!dbellReferences:
<2053@beguine.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!fernwood!portal!cup.portal.com!dbell From: dbell@cup.portal.com (David J Bell) Newsgroups: sci.electronics Subject: Re: Jacob's Ladder "single shot" circuit wanted. It _can_ be do Message-ID: <37392@cup.portal.com> Date: 30 Dec 90 08:43:16 GMT References: <2053@beguine.UUCP> Distribution: na Organization: The Portal System (TM) Lines: 10