🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #945

Re: Car electronics projects

#945
From: ENRIQUEZ
Date: Mon, 24 Jul 1989 16:07
20 lines
1411 bytes
In article <1594@cooper.cooper.EDU> gene@cooper.cooper.EDU (Gene (the Spook) ) writes:
>
>A change of roughly 3miles_per_hour_per_second or more, and the gun
>won't lock on to you.  What I have wanted to do for quite a while is
>to make a microwave generator that sweeps a few kHz on a 3MHz/24MHz
>carrier.  Active ECM!
>
 
About two years ago I saw a project that was labeled as a "microwave
calibrator" that could actually generate the appropriate waves to
force radar to 55mph, 35mph, or 25mph at a flick a switch.  It 
was designed to be used with 12vdc and was small enough to let the
transmitter fit behind the grill of your car. 

I must say the there were disclamers all over the article claiming
the illegality of using this to trick police rader.  However, the box
had a switch clearly labled 55,35, and 25 mph.  Now, there a subtle
design for you!!

regards   mark enriquez 
Technical Details
Message-ID: <543@winnie.fit.edu>
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!gatech!uflorida!winnie!zach!acs60222
References: <14053@haddock.ima.isc.com> <1594@cooper.cooper.EDU>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!gatech!uflorida!winnie!zach!acs60222
From: acs60222@zach.fit.edu ( ENRIQUEZ)
Newsgroups: sci.electronics
Subject: Re: Car electronics projects
Message-ID: <543@winnie.fit.edu>
Date: 24 Jul 89 16:07:59 GMT
References: <14053@haddock.ima.isc.com> <1594@cooper.cooper.EDU>
Sender: usenet@winnie.fit.edu
Reply-To: acs60222@zach.UUCP ( ENRIQUEZ)
Distribution: na
Organization: Florida Institute of Technology, ACS, Melbourne, FL
Lines: 20