🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #9484

Re: ANOTHER house wiring question (this one's basic)

#9484
From: Tad Cook
Date: Mon, 14 Jan 1991 06:20
28 lines
1296 bytes
In article <kJhTxoE@quack.sac.ca.us>, mrapple@quack.sac.ca.us (Nick Sayer) writes:
> 
> Now ground and neutral clearly are not the same thing. I would
> expect negative side effects were I foolish enough to hook
> a light bulb between hot and ground.

Ground and neutral are hooked together at the electrical
service entrance or on your breaker panel.
> 
> But wait! In AC, every half cycle the current goes the other
> way! So why isn't there a potential between neutral and ground?
> Inquiring minds want to know!

The shift in current direction has nothing to do with it, but
actually there usually is a small potential between ground and
neutral at an outlet, depending on the load and the wire
resistance.



Tad Cook
Seattle, WA
Packet: KT7H @ N7HFZ.WA.USA.NA
Phone: 206/527-4089 
MCI Mail: 3288544 
Telex: 6503288544 MCI UW  
USENET:...uw-beaver!sumax!amc-gw!ssc!tad
or, tad@ssc.UUCP
Technical Details
Message-ID: <779@ssc.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!pilchuck!ssc!tad
References: <kJhTxoE@quack.sac.ca.us>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!pilchuck!ssc!tad
From: tad@ssc.UUCP (Tad Cook)
Newsgroups: sci.electronics
Subject: Re: ANOTHER house wiring question (this one's basic)
Summary: neutral, ground
Message-ID: <779@ssc.UUCP>
Date: 14 Jan 91 06:20:11 GMT
References: <kJhTxoE@quack.sac.ca.us>
Organization: very little
Lines: 28