Article View: sci.electronics
Article #9928Re: Help Identify this part
From: Dave Turner
Date: Tue, 05 Feb 1991 18:34
Date: Tue, 05 Feb 1991 18:34
31 lines
1297 bytes
1297 bytes
In article <91033.142929JXS118@psuvm.psu.edu> JXS118@psuvm.psu.edu (Jeff Siegel) writes:
>I think the power switch has a thermal cutoff in it since the switch has
>a metal can that is pressed against the bottom of the heating cup. The
>Patented
>Microtemp (R)
>
>4333A1
>SXPK169C
>
>What is it and where can I get a replacement?
It is a thermal cutoff. My cross-reference isn't handy at the moment but
I'd guess that it opens irreversably at 169 degrees C.
RCA sells replacements but then so does Radio Shack.
The RS catalog lists three:
141 C
128 C
228 C
and says that other values are available on special order.
I use the RCA parts myself.
Don't forget that they must be crimped on; don't solder them.
--
Dave Turner 415/823-2001 {att,bellcore,sun,ames,decwrl}!pacbell!dmturne
Technical Details
Message-ID:
<6006@ptsfa.PacBell.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker.mit.edu!shelby!unixhub!linac!att!pacbell.com!pacbell!ptsfa!dmturneReferences:
<91033.142929JXS118@psuvm.psu.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker.mit.edu!shelby!unixhub!linac!att!pacbell.com!pacbell!ptsfa!dmturne From: dmturne@PacBell.COM (Dave Turner) Newsgroups: sci.electronics Subject: Re: Help Identify this part Message-ID: <6006@ptsfa.PacBell.COM> Date: 5 Feb 91 18:34:16 GMT References: <91033.142929JXS118@psuvm.psu.edu> Reply-To: dmturne@PacBell.COM (Dave Turner) Organization: Pacific * Bell, San Ramon, CA Lines: 31