Help needed with voltage controlled delay circuit

Article View: sci.electronics

Article #9962

#9962

From: Ken F Morton
Date: Thu, 07 Feb 1991 01:08

20 lines
1135 bytes

	I'm working on a drum pad interface and I thought this sub heading
might prove more definitive of the project on this group.
	What I need is a circuit that will take voltage from a piezo element
and 1) Close a contact immediately 2) Close another contact after a delay
period related to the voltage of the trigger signal.  This delay will be
very small, I'm sorry I can't give the range in microseconds, it's less
than one second.

	Anyone have any ideas?

	It must be a *very* responsive circuit.


				Thanks...


				Ken Morton

				v097pba8@ubvmsd.cc.buffalo.edu

Technical Details

Message-ID: <58290@eerie.acsu.Buffalo.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!bcm!dimacs.rutgers.edu!rutgers!ub!ubvmsd.cc.buffalo.edu!v097pba8

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!bcm!dimacs.rutgers.edu!rutgers!ub!ubvmsd.cc.buffalo.edu!v097pba8
From: v097pba8@ubvmsd.cc.buffalo.edu (Ken F Morton)
Newsgroups: sci.electronics
Subject: Help needed with voltage controlled delay circuit
Message-ID: <58290@eerie.acsu.Buffalo.EDU>
Date: 7 Feb 91 01:08:10 GMT
Sender: news@acsu.Buffalo.EDU
Reply-To: v097pba8@ubvmsd.cc.buffalo.edu
Organization: University at Buffalo
Lines: 20
Nntp-Posting-Host: ubvmsd.cc.buffalo.edu
News-Software: VAX/VMS VNEWS V1.3-4.4