🚀 go-pugleaf

In article <2006@lll-lcc.llnl.gov> rzh@lll-lcc.llnl.gov (Roger Hanscom) writes:
>...I'm building a TTL digital counter, and I need a
>1Hz pulse train to feed it.  I'd like to use the 60Hz signal on the
>power transformer, and a MINIMUM of components to condition it and

The power line is a noisy place, and grunge on it will screw up your timing
if it's for anything critical.  Just clipping the raw line is not the best
thing to do.  I saw a design idea in a magazine once that addressed this
problem.  What he did was to design a simple 60 Hz RC-Schmitt trigger
oscillator that was synchronized to the line with a high-value resistor.
The power line only had a limited effect on the oscillator -- high-frequency
junk couldn't sway this oscillator very much.  A rather simple bandpass filter
combined with the output conditioning circuit all in one neat circuit!  
Unfortunately I can no longer find the article, but the circuit itself used 
about a half-dozen components.  

+----------------+
! II      CCCCCC !  Jim Cathey
! II  SSSSCC     !  ISC Systems Corp.
! II      CC     !  TAF-C8;  Spokane, WA  99220
! IISSSS  CC     !  UUCP: uunet!iscuva!jimc
! II      CCCCCC !  (509) 927-5757
+----------------+
			"With excitement like this, who is needing enemas?"