🚀 go-pugleaf

Yes, I'm still cleaning out my calibration tech. buddy's basement!

I've also got lots of other test equpment goodies:  You may want to check
out my FS posts regarding Oscilloscopes, Digital & Analog Multimeters,
Power Supplies, RF Amplifiers, and Misc. Test Equipment on the
sci.electronics groups.  

If you're into HAM, please also check out my posts on rec.radio swap.

Some of this stuff I posted before, and some items are new (to me!)  All
of this stuff is used.

Hewlett Packard 5340A Frequency Counter (see HP catalog).  10Hz to 18GHz. 
$1500/obo

Hewlett Packard 8660A display w/ 86631B Function generator plugin module. 
Synthesized output.  10kHz to 2.6GHz.  Needs RF plugin module (which I
don't have) in order to work.  These pieces check out, but you'll need the
RF module to use this setup. (I don't have the part number.)  List for
this pair is about $20,000.  I'd like $1000/obo.

B&K 1850 Frequency Counter.  520MHz.  6 digit frequency & period
measurement.  Prescaler, auto/1sec, 1x/10x switches.  50ohm and 1megohm
inputs (both BNC)  Runs on AC or 12VDC power.  About the size of a car
stereo.  Perfect condition.  No manual or power cord.  Sold as companion
to:

B&K 3010 Function Generator.  Square, triangle, sine output at 0.1 to
1MHz.  1,10,100,1k,10k,100kHZ ranges scalable from .1 to 10.  DC offset,
amplitude pots.  TTL level, and 600ohm outputs, ground plug, all bananna
sockets.  AC power only.  Same style case as above.  Also in perfect
condition w/ copied manual, (includes schematic!) and power cord.  (can
use same power cord on counter and this generator.)   BOTH PIECES for
$275/obo.

CTS Knights 1MHz crystal/oven timebase.  $70/obo

Textronix TM504 frame w/ FG502 Signal Generator, RG501 Ramp generator, and
DC504 frequency counter.  Will consider separating.  Details of plugins:
FG 502:  10MHz max freq., sine, triangle, square, pulse.  Can be used as VCO!
RG 501:  Well, it's a ramp generator!  For more details, see a TEK catalog.
DC 504:  80MHz max freq.  Gives frequency and time interval readings.
For the frame with these plugins, I'd like $700/obo

Eico 324 RF signal generator.  150kHz to 435MHz.  Very stable.  Has
features and simple attenuator like knight below.  $60/obo

Knight Tube RF signal generator.  Yep, its old, but it works fine. 
Features internal and external (via input) AM modulation, and RF
attenuation (coarse and fine adjustments.) Frequency range: 160kHz -
112MHz.  $40/obo

Please note that all of the prices are FOB Chicago, Illinois--- therefore,
consider what you'll pay for shipping before making an offer.  Depending
upon the value of the item/items you're interested in, I can ship COD
anywhere.  For the cheaper stuff, I'd prefer advance payment before I
ship, (this'll save you $4.75-$10 in COD service charges!)

Please respond via email.

Thanks,

Eric.

emaxon@ais.net