Simulab -> SystemBuild translation

Article View: sci.engr.control

Article #129

#129

From: William J. Bencze
Date: Tue, 17 Nov 1992 13:27

21 lines
1218 bytes

Howdy Folks,

  Has anyone built, used, or heard of a translator/filter which
takes Matlab's Simulab system description files and converts them
to Matrix-x's SystemBuild format automatically?  I currently use
Matlab, but would like to use Matrix-x's Autocode function to
generate real-time code which I then can download to their AC100
real-time control box. 

  If anyone has any pointers, hints, or leads on this, please let
me know, either on this group or via e-mail.  Thanks alot, and
keep 'em stable...

-Bill

--
----
 William Bencze                           bencze@isl.stanford.edu
 Department of Electrical Engineering          (415) 497-4210 (H)
 Stanford University                           (415) 723-5176 (O)

Technical Details

Message-ID: <BENCZE.92Nov17132726@isl.stanford.edu>

Path:

arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!pacbell.com!sgiblab!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!stanford.edu!EE.Stanford.EDU!sierra!bencze

Show Full Headers

Complete Article Headers

Newsgroups: sci.engr.control
Path: arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!pacbell.com!sgiblab!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!stanford.edu!EE.Stanford.EDU!sierra!bencze
From: bencze@isl.stanford.edu (William J. Bencze)
Subject: Simulab -> SystemBuild translation
Message-ID: <BENCZE.92Nov17132726@isl.stanford.edu>
Sender: usenet@EE.Stanford.EDU (Usenet)
Organization: Stanford University
Date: 17 Nov 92 13:27:26
Lines: 24