Article View: sci.materials
Article #270Optical sensors in welding
From: Suresh Raghavan
Date: Fri, 13 Nov 1992 17:07
Date: Fri, 13 Nov 1992 17:07
8 lines
969 bytes
969 bytes
Hi Folks, I am working in the area of gas metal arc and submerged arc welding. We are using an infrared sensor to monitor and control our welding path and penetration. However, I am interested in knowing about optical sensors (visible range), and how effective they are in doing the same. Fiber optics is also an area that I am interested in, especially in monitoring submerged arc welds. Any information is most welcome. Suresh
Technical Details
Message-ID:
<1992Nov13.170713.773@news.duc.auburn.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!news.tek.com!uw-beaver!cs.ubc.ca!destroyer!gatech!darwin.sura.net!news.duc.auburn.edu!doppler.me!raghavanShow Full Headers
Complete Article Headers
Newsgroups: sci.materials Path: arc1-ca.pugleaf.net!sparky!uunet!news.tek.com!uw-beaver!cs.ubc.ca!destroyer!gatech!darwin.sura.net!news.duc.auburn.edu!doppler.me!raghavan From: raghavan@eng.auburn.edu (Suresh Raghavan) Subject: Optical sensors in welding Message-ID: <1992Nov13.170713.773@news.duc.auburn.edu> Sender: usenet@news.duc.auburn.edu (News Account) Nntp-Posting-Host: doppler.me.eng.auburn.edu Reply-To: raghavan@eng.auburn.edu Organization: Auburn University Engineering Date: Fri, 13 Nov 1992 17:07:13 GMT Lines: 12