insulative fluids for thermal chamber

Thread View: sci.materials

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Jianzhong Huang Fri, 08 Jan 1993 00:20

#400

Author: Jianzhong Huang
Date: Fri, 08 Jan 1993 00:20

10 lines
978 bytes

 I need some information about circulation fluids used in thermal chambers.
Please reply to jhuang@kcgl1.eng.ohio-state.edu if you can help.

 The circulation fluids will be used in testing setup to check computer
chips at temperatures around -100 C to -50 C. The fluid will used in
the thermal chamber to maintain a constant temperature, and it should be
insulating but with a high thermal conductivity. I heard about some organic
based fluids, but need more information.

 Thanks in advance.

Re: insulative fluids for thermal chamber

#406

Author: Scott Lindsey
Date: Fri, 08 Jan 1993 10:20

15 lines
1225 bytes

In article <1993Jan8.002019.12042@magnus.acs.ohio-state.edu>, JHUANG@kcgl1.eng.ohio-state.edu (Jianzhong Huang) writes:
> 
>  I need some information about circulation fluids used in thermal chambers.
> Please reply to jhuang@kcgl1.eng.ohio-state.edu if you can help.
> 
>  The circulation fluids will be used in testing setup to check computer
> chips at temperatures around -100 C to -50 C. The fluid will used in
> the thermal chamber to maintain a constant temperature, and it should be
> insulating but with a high thermal conductivity. I heard about some organic
> based fluids, but need more information.
> 
>  Thanks in advance.
> 

Buy Fluorinert from 3M. It's very expensive but it's great stuff.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads