🚀 go-pugleaf

In article <636@ndmath.UUCP> milo@ndmath.UUCP (Greg Corson) writes:
>I recently read about a computer company using a neon tube (bent in
>a serpentine pattern behind diffusing glass) as a backlight for it's
>portable computer LCD screen.  Their reason was supposedly lower power
>requirements than an Electroluminescent pannel.

>Is this correct?  How difficult would it be to make a power supply that
>would run off 6-12 volts to drive such a neon tube.

Sounds reasonable; glow tubes are efficient, cool, diffuse.

How difficult? Depends on the required voltage, which you need to
find out. A neon tube inches long could require kilovolts, which
would be a pity, since up to a few hundred volts there are
simplified, reasonably-efficient (30%-50%) high-voltage generator
circuits from batteries, using a transistor with an inductive
collector load. If you want to be unreasonably efficient, up to
85% or so, you must use a transformer designed for the purpose,
with a proper drive circuit. Middlebrook (?) at Cal Tech has
refined this to an art, and I believe he has a book out.

Sorry that I can't provide hard details about the tubes themselves;
my experience is with the DC-DC conversion part, which I have
used successfully for small (100v) neon bulbs and xenon flashtubes
(200-300v).

Max Hauser / max@eros.berkeley.edu / ...{!decvax}!ucbvax!eros!max

"For every complex problem, there is a solution that is simple,
neat, and wrong." -- H.L. Mencken (as quoted by Ron Ueberschaer)