Article View: sco.opendesktop
Article #22SLIP Drivers SCO-ODT
From: Alan Anderson [068]
Date: Thu, 25 Oct 1990 23:41
Date: Thu, 25 Oct 1990 23:41
22 lines
990 bytes
990 bytes
I am trying to install a SLIP tcp-ip driver on a system that is currently using a Western Digital 8003 for ethernet. They need to be used concurrently. Steps Performed were: mkdev tcp added a SLIP driver defined the tty set the source and destination IP address set baud rate to 9600 used the SLIP Interface default netmask when the Kernel was re-linked and the system re-booted, it hung up at TCP initialization. Please respond on sco.opendesktop, I don't trust MMDF yet. Thanks Alan Anderson (901) 762-6068 United Dominion Building 6000 Poplar Suite 400 Memphis, TN 38119
Technical Details
Message-ID:
<5@alana.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!bu.edu!decwrl!wuarchive!psuvax1!rutgers!dynasys!alana!jaaShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!bu.edu!decwrl!wuarchive!psuvax1!rutgers!dynasys!alana!jaa From: jaa@alana.UUCP (Alan Anderson [068]) Newsgroups: sco.opendesktop,comp.protocols.tcp-ip Subject: SLIP Drivers SCO-ODT Keywords: SLIP SCO-ODT Message-ID: <5@alana.UUCP> Date: 25 Oct 90 23:41:36 GMT Followup-To: sco.opendesktop Organization: United Dominion Buildings Lines: 22