🚀 go-pugleaf

If you have the hub NDH305 from SOHOWARE, it can handle both 10 and
100Mbps (if you have the SFH105, it can do 100Mbps only)..the NDH305
adjusts for either. What their tech support told me tonite was that I
need a CAT5 cable (RJ45 connectors) between the cable modem and the hub
..those cables that came with the hub are to be used between hub and pc
only, not for use between the modem and hub. I will be buying a CAT5
cable tomorrow and try again tomorrow nite.

"Maynard G. Krebbs" wrote:
> 
> I have the same SOHOWARE package and a cable modem but I just found out from
> reading MaximumPC magazine that the 100BaseT hub ONLY works at 100, not
> 10BaseT.  Cable modems can only work at 10BaseT.  There are hubs that can be
> operated at either speed but not the SOHOWARE.  I always seem to miss some
> key criteria when I buy hardware.
> 
> Jim Furlong <jpfurlong@home.com> wrote in message
> news:37E402A2.48A1E3CF@home.com...
> > Anyone heard of this..got a SOHOWARE (NDC) 10/100 networking kit, with
> > two pci fast ethernet cards and a hub. It's advertised as able to handle
> > the cable modem via the first port on the hub (with a switch for
> > uplink)..anyway it doesn't work. I can connect directly to the cable
> > modem (TCI/AT&T @home) and get in fine. However connecting the cable
> > modem to the hub doesn't work. I've tried a crossover cable between the
> > modem and hub, and it still won't connect to the internet. Any help
> > would be appreciated.