🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

1 total messages Started by Glenn Trewitt Mon, 21 Aug 1989 17:59
Busted 800K internal floppy -- Mac II
#4
Author: Glenn Trewitt
Date: Mon, 21 Aug 1989 17:59
46 lines
2870 bytes
Woe is me!  The 800K internal floppy drive on my Mac II just died.  The cause
of death is quite obvious -- the upper head came loose and was ripped the rest
of the way off by the next floppy I inserted.  I am a Stanford student, so I
can get educational consortium prices for either repairs or replacements.  The
two options that I have right now are:
  1) Pay $159 and get an Official Apple-Sanctioned replacement.  For
	an additional $25 (for installation) I would get an Official Apple
	90-day warrantee.
  2) Pay $415 and get a ROM upgrade and FDHD (1.44 Mbyte) drive, and a
	90-day warrantee.
  3) Do both of the above and have two not-completely-compatable drives.
	This seems like a questionable idea, since some of my disks would
	then be readable only on one drive.  Also not much need, since I
	have a hard disk.

Now for the questions:
  0) I presume that Apple is the only source for the FDHD upgrade.
	(I can't imagine otherwise.)
  1) Is it worth it to upgrade to the FDHD?  I understand the benefits of
	the increased capacity, but am concerned about compatability.
	Specifically, high-density drives write much narrower tracks.  On
	IBM 5-1/4" drives, this can cause marginal reading performance by
	older normal-density drives because they expect wider tracks and
	aren't quite sensitive enough to read the narrower high-density
	tracks reliably.
  1.5) If I get the FDHD, does Apple provide any *software* to read/write
	IBM-format diskettes?  This could be a big plus.  Or do I have to
	buy translators from DataViz?
  2) Are there third-party 800K drives that will mount inside a Mac II?  
	If so, who sells them?
  3) Can Apple external 800K drives be un-shelled and mounted internally?
	I might be able to get one of these sort-of cheaply.
  4) Is there anyone that actually repairs these things?  The head has
	plug-in connections, so it would just be a matter of replacement
	and re-aliginment (right?).  (SF Bay-area only, please.)
  5) Have I left out any options?

I've borrowed a drive from a friend (may you be blessed forever, John!),
so I am not in a severe rush -- I can take my time.

Thanks in advance for any advice.
	- Glenn Trewitt
-- 
Glenn Trewitt, Center for Integrated Systems, Stanford University
	{ucbvax,decvax}!decwrl!miasma.stanford.edu!trewitt	USENet
	trewitt@miasma.stanford.edu				Internet
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads