🚀 go-pugleaf

Hi...

	I sure hope someone can help me with this, because
I can't figure it out :(

	I keep getting a failed conversation with one of the
sites I talk to.  We're getting great transfer rates while we
are connected (1200bps/V32bis) but after it transfers a couple
of files, it disconnects.

	Now, I'm not the greatest at this stuff (modems, that is)
so I've included everything that I think is pertinent.  The
settings are my 'default' settings, and the Devices.uucico file
entry is what I  am using to dial into this site.  The things
that I have been fiddling with have been S180 and S181...is
there something else I should fiddle with?  

	Finally, if it matters any, I've added the end of the 
Uutry session that I captured.  Error level is at the 
default level.

	One person suggested that I was having a problem with
flow control (RTS/CTS), but I was told that uucico does its own
flow control, so that is why S58=0.

	Any suggestions would be greatly appreciated.  The modem
that I'm talking to is not a Telebit (don't know what it is though)
If someone thinks they might have an idea of what I'm doing wrong,
but I'm not supplying enough info, please email me or post some
ideas.

Thanks...

Marc

-------------[ Modem Settings ]---------------------


AAATE1&V
T3000SA - Version LA3.00 - Active Configuration
 B1  E1  L1  M0  P   Q0  V1  X2  Y0 
&C1 &D3 &G0 &J0 &L0 &Q0 &R3 &S1 &T4 &X0 
S000:1   S001=0   S002=43  S003=13  S004=10  S005=8   S006=2   S007:50 
S008=2   S009=6   S010=14  S011=70  S012=50  S018=0   S025=5   S026=1  
S038=0   S041=0   S045=0   S046=0   S047=4   S048=0   S050:7   S051:5  
S056=17  S057=19  S058:2   S059:15  S060=0   S061:0   S062=15  S063=0  
S064:1   S068=255 S069=0   S090=0   S093=8   S094=1   S100=0   S102=0  
S104=0   S105=1   S111:30  S112=1   S180=2   S181=1   S183=25  S190=1  
S253=10  S254=255 S255=0   
OK
~.
RING

-------------[ Entry from Devices File ]-------------------------

tb-V32bis	=,-, "" AT "" ATE1Q2 "" ATS7=50S50=7S58=0S180=2S181=1S190=0 OK ATDP\T CONNECT

------------[ End of Log of Uutry ]---------------------------

setline - S
wrktype - S
 wmesg 'S' D.r-nod20811f9 D.r-nod20811f9 news - D.r-nod20811f9 0666 news
rmesg - 'S' got SY
 PROCESS: msg - SY
SNDFILE:
cntrl - -1
send OO 0,exit code -1
Conversation Complete: Status FAILED