Article View: triangle.forsale
Article #1495Re: Advice wanted re: fix or junk old freezer
From: Mark
Date: Mon, 22 Jun 1998 00:00
Date: Mon, 22 Jun 1998 00:00
90 lines
4640 bytes
4640 bytes
Thomas Gauldin wrote: > > I'd be a bit cautious for two reasons. First of all, if it's old, it > may fail and leave you with some ruined food. In addition, an old > freezer probably isn't as well insulated as a newer one, costing you > more electrical consumption. > > Have you considered making it "child safe," by removing the latch, > putting it out behind the house and using it as an upright smoker? A > lot of good barbecue has come out of old, abandon refrigerators and > freezers when folks put a barrel beside them and feed the smoke from > the fire into the old freezer with a stove pipe. > > -- > Tom Gauldin, Raleigh NC > -NetMeeting ils.four11.com, Live Birdfeeder Action > ICQ 7022136 fax (919) 676-1404 > ftp://ftp.mindspring.com/pub/users/scoundrl/home.htm > ---------------------------------------------------------------------- > --------------- > Here's to the land of the Longleaf Pine, > The Summerland, where the sun doth shine, > Where the weak grow strong, and the strong grow great, > Here's to Downhome, the Old North State. > > Paul Gronke wrote in message <6mj68e$b9h$1@news.duke.edu>... > >An old Frigidaire upright freezer was left on the screen in porch of > a house > >we are buying. > > > >The freezer clearly works (lots of built up ice/frost inside) but has > some > >real problems. The door seal needs to be replaced but more > seriously, the > >bottom of the front door has some serious rust, so much that I can > push in the > >metal and feel the inner insulation. > > > >Not sure if the thing leaks air badly; there was some water beneath > it, but > >this may be due to the bad door seal. > > > >Questions: > >1) I was thinking of sanding off some fo the rust and painting the > thing w/ > >rustoleum. Reasonable? Can I just ignore the corroded metal, fill > it in, > >etc, and have a working freezer? (A freezer isn't critical, but we > need to > >economize so it could be helpful) > > > >2) How uneconomical is this thing likely to be? I've seen chest > freezers > >posted on tri.forsale for as little as $75. Is this upright so old > that it's > >likely to be very expensive to run? > > > >3) If I wanted to get an answer to 2), what do I need to know? The > wattage of > >this thing? Is there some device I can plug in between the outlet > and the > >freezer to measure its power draw? > > > >Thanks for any help. I'd like to comment on both previous replies & add some. As far as the Freon issue goes, well, I better not comment on this - use your own common sense (while noting what kind of neighbors, etc. you may have)... Energy consumption - good points; however, let's look at the big picture here. Are we talking about a lifelong investment where we're gonna be running some serious power consuming equipment that varies widely w/such? The max. current that any household unit can consume vs. the most energy efficient is not a MAJOR amount, unless you apply a significant time factor (as well as how often you open & close the door, etc.). One thing I'd like to point out, in favor of the "old" refrigerators is that as attractive as the "frost free" feature is on the new units or energy savings, for that matter, it is actually not as good for long-term food storage. The frost free feature merely allows the inside temp. to increase to the freeze/melt point where frost turns into liquid & then refreezes again. The old units work much better at keeping contents at a constant, "freeze" temp., but build up frost when the door is opened & humidity is allowed to enter. As far as the other things like legal issues (child safe) again, better not comment, I only want to type so much... Best wishes, mark
Technical Details
Message-ID:
<358EC6C2.6B40@mindspring.com>Path:
arc1-ca.pugleaf.net!unknown!not-for-mailReferences:
<6mj68e$b9h$1@news.duke.edu> <6mj859$fe3$1@camel21.mindspring.com>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: 101acf,cf3dd3ba8a629b60 X-Google-Attributes: gid101acf,public X-Google-Thread: 10baf4,cf3dd3ba8a629b60 X-Google-Attributes: gid10baf4,public X-Google-Thread: 114e5f,cf3dd3ba8a629b60 X-Google-Attributes: gid114e5f,public From: Mark <mrmmaxie@mindspring.com> Subject: Re: Advice wanted re: fix or junk old freezer Date: 1998/06/22 Message-ID: <358EC6C2.6B40@mindspring.com> X-Deja-AN: 365096261 Content-Transfer-Encoding: 7bit References: <6mj68e$b9h$1@news.duke.edu> <6mj859$fe3$1@camel21.mindspring.com> To: Thomas Gauldin <scoundrl@mindspring.com> X-Server-Date: 22 Jun 1998 21:07:51 GMT Content-Type: text/plain; charset=us-ascii Organization: MindSpring Enterprises Mime-Version: 1.0 Reply-To: mrmmaxie@mindspring.com Newsgroups: triangle.forsale,triangle.general,duke.general