Drive type needed for Conner Peripherals CP3000

Thread View: triangle.general

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Edmund Burnette Tue, 21 Jul 1992 17:01

#40

Author: Edmund Burnette
Date: Tue, 21 Jul 1992 17:01

22 lines
1426 bytes

I need a drive type (and whatever other specs you might have) for a
Conner Peripherals CP3000 3 1/2" hard disk.  It's not written on
the drive anywhere I can see.  Type 8 "appears" to work, but I'm
pretty sure it's not the right type.

Also, does anyone have a setup program they could loan me that would
work with a Compaq 286/12 and accept the right drive type. I have an
old AT diagnostics disk that only accepts numbers up to 15, and I
suspect the right type is >15.

BTW, my memory problem turned out to be bad settings on the AST
memory board.  The boot test indicated 2M+640K of memory; when I took
the 2M card out the boot test indicated 2M of memory.  I found a
company that would sell me driver software and documentation for
the card cheap (Alphanumeric Systems).

Thanks.

-- 
Edmund Burnette, SAS Institute Inc.    (919)677-8000 | sasebb@unx.sas.com
SAS Campus Drive, Cary, NC 27513  (919)677-8123(fax) | ...!mcnc!sas!sasebb

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads