🚀 go-pugleaf

In article <45bm1m$fq2@idefix.CS.kuleuven.ac.be>,
Geert Uytterhoeven <geert@cs.KULeuven.ac.be> wrote:
>In article <45aqvh$p2i@osfb.aber.ac.uk>, dbt3@aber.ac.uk (DOMINIC TRISTRAM) writes:
>|> This may not be the correct place to ask but...
>|> I'm trying to connect a dot-matrix printer to my Sun Sparc 1+
>|> through a parallel connection. Unfortunatley there are THREE
>|> female 25-way d connectors on the back - one marked A, another
>|> B and one unmarked! I would guess that two are serial and
>|> one is parallel, but I have no manuals and no-one at work can
>|> help, so can anyone help with this? I don't want to send 12V
>|> serial signals to a 5v parallel printer!
>
>Two of the connectors are indeed serial ports, but I don't think a SPARC 1 has
>a parallel port, at least most Suns don't have one.

The only Sun (desktop) workstations which have/had parallel ports are the
following:-

	3/80
	386i
	SPARCstation 4
	SPARCstation 5
	SPARCstation 10
and	SPARCstation 20

The SPARCstation 1/1+ and 2 have two 25 pin serial ports and a 50-way
micro-D SCSI port, plus audio and keyboard micro-DIN sockets.

The SPARCstation SLC and ELCs have the keyboard and audio ports and a
combined serial port a and B in one 25 way D socket.

The SPARCstation IPC and IPX's have two micro-DIN sockets (RS423) serial
ports.

The 3/80 and 386i have standard PC-style parallel ports, the other machines
with parallel ports use a minature AMD socket for which you need to buy a
special adaptor cable.

It's probable that the originator of this thread is mistaking the 50-way
micro-D SCSI port for a parallel port (somehow).

I hope this has helped clear up the confusion.

Steve
-- 
---------------------------------------------------------------------------
Computer Systems Administrator, Dept. of Earth Sciences, Oxford University.
E-Mail: steve@uk.ac.ox.earth (JANET) steve@earth.ox.ac.uk (Internet).
Tel:- Oxford (01865) 282110 (UK) or +44 1865 282110 (International).